Welcome, Guest ( Login )

PUK Welders



1028: PUK D5 Pulse Welder Unit

PUK D5 Micro Pulse Welding System
Developed for Daily Use in Orthodontic and Dental Laboratories
The PUK Welding System is Delivered with the Following Accessories and Contains All Necessary Documentation and Instructions:
  • The PUK welding system with the selected welding microscope including the welding handpiece
  • 3 different contact clamps,retention welding adapter (set of 1.2, 1.3, 1.5 and 2 mm including 10 retention pins), gas hose, cleaning brush and connecting cable
  • 1 set special electrodes
  • 100-600 USF Argon gas flow regulator by Lampert
  • Footswitch
  • A small welding course with brief instructions, some stainless steel sheets, and welding wire.
  • Manual
  • DVD with videos and information in 5 languages

PUK-410: 0.5 mm Standard Electrodes

Standard Electrodes - 0.5 mm
NO Disk Included
 
Ships in a Ten (10) Pack

PUK-411: 0.6 mm Standard Electrodes

Standard Electrodes - 0.6 mm
NO Disk Included
 

Ships in a Ten (10) Pack

PUK-413: 0.8 mm Standard Electrodes

Standard Electrodes - 0.8 mm
NO Disk Included
 

Ships in a Ten (10) Pack

PUK-433: INOSTAR 0.8 mm Electrodes

INOSTAR 0.8 mm Electrodes  with Diamond Disk*
Ships in a Ten (10) Pack
*While Supplies Last - Vendor Discontinuing

PUK-856: PUK Electrode Sharpener

PUK Electrode Sharpener -
Compatible with All PUK Welding Devices
Care of the Electrode Tips is Vital to Good Welding Results
The Grinding Motor is a Useful Accessory for Every PUK Welding Device
 

PUK-705: Replacement Diamond Grinding Wheel

PUK Electrode Sharpener Replacement Diamond Grinding Wheel

PUK-706: Fine Diamond Grinding Wheel

Fine Diamond Grinding Wheel
0.20 mm with a 0.23 mm Shaft
 
 

PUK-500

PUK-500

US$62.80

Flat Peaked Pliers
With Cable
Nickel Plated
 
 

PUK-707: Diamond Grinding Wheel - Extra Fine

Diamond Grinding Wheel - Extra Fine  (Special Order)
0.20 mm with a 0.23 mm Shaft
 
 

1028: PUK D5 Pulse Welder Unit

PUK D5 Micro Pulse Welding System
Developed for Daily Use in Orthodontic and Dental Laboratories
The PUK Welding System is Delivered with the Following Accessories and Contains All Necessary Documentation and Instructions:
  • The PUK welding system with the selected welding microscope including the welding handpiece
  • 3 different contact clamps,retention welding adapter (set of 1.2, 1.3, 1.5 and 2 mm including 10 retention pins), gas hose, cleaning brush and connecting cable
  • 1 set special electrodes
  • 100-600 USF Argon gas flow regulator by Lampert
  • Footswitch
  • A small welding course with brief instructions, some stainless steel sheets, and welding wire.
  • Manual
  • DVD with videos and information in 5 languages

0 Item(s)
US$0.00